- Type - FNDP 250 UL (we also have: FNDP 250 UP);
- Number for UL - 12398; and forUP - 12390;
- Made in - 1996;
- Weight - 7.710,3 kg;
- Cooling efficiency - 869 kW;
- Exchanging area - 257,5 m2;
- Condensation - + 350C;
- Wet thermometre - +210C;
- 3 fans;
- Fan's type - AT28 28G2C;
- Engine's type - Sg160M8A;
- Engine's power - 4 kW;
- Turnovers - 705 U/min.
Overall dimensions:
- Length - 4.900 mm;
- Width - 2.050 mm + 1.250 mm (fans);
- Height - 3.210 mm.
click the picture to zoom it (in the new window)!
415.6
Condenser "Gntner"
Technical data:
2-fan condenser;
Type - KAHN 5o/2;
No 4 1479;
Made in - 1984.
Overall dimensions:
length - 1.700 mm;
width - 800 mm;
height - 1.050 mm.
click the picture to zoom it (in the new window)!
415.7
4-fan condenser with the tank for ammonia
Overall dimensions:
length - 5.400 mm;
width - 1.850 mm;
height - 3.140 mm.
Fan's engine technical data:
type - Sg90L4;
3 phases;
Voltage - 380 V;
Frequency - 50 Hz;
1.380 turns./min.;
Power - 2,2 kW;
Amperage - 5,4 A;
Weight 23 kg;
temp. - 40 C degrees.
Cooling agent technical data:
type - ZL2 U2P;
pressure - 18 MPa;
temperature - 373 K degrees;
capacity - 2.150 l;
Cooling agent overall dimensions:
length - 3.700 mm;
width - 1.120 mm;
height - 1.450 mm;
diameter - 900 mm.
click the picture to zoom it (in the new window)!
415.8
Condenser "Promarket" Wrocaw, Polska - type CLK/N 500
Condensers CLK are used for condensing
liquid cooling agent - hot ammonia steam - in industrial instalations
using water and air flowing in to opposite directions.
Condenser construction:
heat exchanger;
condenser bath;
fans set;
Technical data:
Exchanging area - 500 m²;
cooling efficiency - 1.460 kW at +40ºC, with sucking pressure at
temp. -10ºC;