Processing ability from 1500-1800 kg of dried onions during 24
hours, at the primary water content in an onion from 85-87%, and
final humidity of a complete product (dried) sliced at 3 mm thick
slices - 5-7%.
Technical data::
power demand - 16,6 kW;
steam consunption - 1.000 to 1.200 kg/hr;
belt width - 2.000 mm;
number of belts - 5 pieces;
maximum steam pressure in a drier - 8 atm;
water consumption - 0,6m3/hr;
belts linear velocity - 0,1-0,6 m/min
Overall dimensions:
- length
15.000
mm;
-width with ladders
3.700
mm;
- height
5.800
mm.
Click the picture to zoom it (in the new window!)
The pictures of the machine in the drying plant
Belt dryer
205.2
Drum drier, steam type
Technical data:
total length - 1.050 mm;
total width - 1.150 mm;
total height - 1.770 mm;
rated power - 1,5 kW;
steam pressure - 0,5 MPa;
rated load capacity - 1,6 kg;
power supply - 50 Hz;
voltage - 3 x 380/220 V;
weight - 500 kg;
type - SB 16,2
Click the picture to zoom it (in the new window!)
Drum drier, steam type
205.3
Centrifuge for feathers, potato pomace etc., cyclic
Technical data:
total height - 900 mm;
diameter - 100 mm;
engine power - 1,4 kW, 1.410 r.p.m.
Click the picture to zoom it (in the new window!)
Centrifuge for feathers, potato pomace etc., cyclic
205.4
Steam supplied feathers drier
Overall dimensions:
Total length - 4.100 mm;
Total height - 2.500 mm;
Total width - 1.800 mm;
Drain's diameter - 200 mm;
Side-manhole: width - 680 mm, height - 1.460 mm.
Technical data:
Engine's power - 4,6 kW, 1.485 r.p.m.
Click the picture to zoom it (in the new window!)
Steam supplied feathers dryer - the pictures of the
machine before reconditioning
205.5
Coffee roasting machine KAW-1
It's used for roasting coffee, cocoa or nut beans. The process of
roasting takes place in an electric heated rotary drum at
temperature around 200C. Through holding the beans at temperature
mentioned above for a specific period of time, you achieve roasted
beans that are ready for further processing (grinding for example).
Technical data:
Rotary drum's diameter - 800 mm;
Rotary drum's length - 1.250 mm;
Rotary drum's rotational speed - 15 r.p.m.;
Gear ratio - i=1:12;
Engine's power - 0,55 kW, 3x380V;
Heaters' power - 12x1,1 kW=13,2 kW
Overall dimensions:
Length - 1.900 mm;
Width - 1.200 mm;
Height - 1.800 mm;
Total weight - approx. 500 kg
Click the picture to zoom it (in the new window!)
Coffee roasting machine KAW-1
205.6
Electric machine for roasting nuts - MANDELPROFI
Technical data:
Manufacturer - Mandelprofi, Germany;
Copper kettle volume - 15 l;
Electric heating - 4,95 kW infinitely variable by electronic
thermostat;
Mixer drive - 0,18 kW excess current switch1,2 A;
Kettle drive - 0,18 kW excess current switch;
Electric power value - 400 V; 3 x 16A; 5,3 kW; 50 Hz;
Frame and panelling - plastic coated extreme pressure steel;
Color - violet Ral 4005;
Mixer arm - chromium-plated steel housing; ball-bearing-supported
chain gear;
Weight - 75 kg.
Overall dimensions:
depth - 550 mm;
width - 550 mm;
height - 860 mm.
Click the picture to zoom it!
205.7
Centrifuge for drying (water separating)
Overall dimensions:
length - 650 mm;
width - 750 mm;
height - 760 mm;
drum's diameter - 500 mm;
drum's depth - 200 mm;
perforation diameter - 6 mm;
capacity - ca. 40 l.
Stainless steel drum, drum's bottom, conical fixing and corp painted.
Click the picture to zoom it!
The picture of the machine after reconditioning
205.8
Centrifuge for drying (water separating)
Overall dimensions:
length - 1.350 mm;
width - 1.085 mm;
height with closed lid - 910 mm;
height with open lid - 1.440 mm;
drum's diameter - 700 mm;
drum's depth - 420 mm;
perforation diameter - 6 mm;
pojemno bbna - 175 l;
drum's speed - ca. 1.150 U/min.;
anchorage - 3 anchors - M18x200;
power supply - 3x380 V/50 Hz;
engine's turnovers - 1.430 U/min.;
Engine's power - 3 kW;
weight - ca. 680 kg.
Stainless steel drum, drum's bottom,
conical fixing and cor painted.
